Start Method - Vidicode Call Recorder Single II Manual

Record from :
NEXT
• Press CHANGE CHANGE CHANGE CHANGE to select the desired Record source:
Select:
- Line (analogue telephone)
- Handset (digital telephone)
- Microphone
- Press NEXT to move on to the next menu item.

12.2 Start method

Start method is largely dependant on the way your call recorder is
connected to the telephone
Start :
NEXT
Use Series Off Series Off- - - - hook hook if you want to start and stop recording
Series Off Series Off hook hook
automatically and you have an analogue line connected to the Line-in
and the telephone on the Line-out of the Single II.
Use Parallel Off Parallel Off- - - - hook hook if you want to automatically start and stop
Parallel Off Parallel Off hook hook
recording and your telephone line is connected on the Line-in using a
splitter on the line.
Use Series + parallel Series + parallel if you are not sure whether the Single is connected
Series + parallel Series + parallel
in series or parallel.
Use Close contact Close contact if the Switch is connected to an external contact, as is Close contact Close contact
used in some types of telephones / PBX's.
Use Voice activated Voice activated if the Single II is connected to the handset of the
Voice activated Voice activated
(digital) telephone.
Use Manual Manual if you want to control which call is recorded and which is Manual Manual
not.
• Press CHANGE CHANGE to select the desired Start method:
CHANGE CHANGE
50 Manual Call Recorder Single II © 2011-2014 Vidicode®
CHANGE
Series Off hook
CHANGE
Line
STOP
STOP