Table of Contents
Advertisement
Welcome Message 15
STORE
• Press STORE
STORE
STORE
STORE to save the recorded welcome message.
Keep a list of Welcome messages. If you want to change the message to
another previously recorded message, simply change the number.
• Press 0-9 for welcome messages 0-9. Press
messages 10-19. Press #0-#9 for welcome messages 20-29.
• Press STOP
STOP
STOP
STOP
8.3 New Messages.
When there are new messages on the Single II the display will say:
Wednesday
3 new messages
• Press the Playback messages
Playback messages
Playback messages
Playback messages function key
to the new messages. Playback of the new messages will start
immediately.
All the new messages have to be listened to before they can be saved.
During playback messages can be skipped with the skip
all the new messages have been played or scrolled through you will be
prompted whether to save or delete the messages.
8.4 Playback messages
• Press Playback messages
for messages.
Playback Message
DISK
SD-CARD
• Press DISK
DISK or SD
DISK
DISK
looking for are located.
38
Manual Call Recorder Single II © 2011-2014 Vidicode®
03-07-14 16:15
LAST
SD- - - - CARD
CARD depending on where the messages you are
SD
SD
CARD
CARD
CANCEL
0- 9 for welcome
function key to start searching
STOP
to start listening
key. When
Advertisement
Table of Contents
Need help?
Do you have a question about the Call Recorder Single II and is the answer not in the manual?
Questions and answers
we try call in but caller number no appear
The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:
1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.
Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.
This answer is automatically generated