Service Timer; Monitor Active - Vidicode 010.01830 Manual

• Press CHANGE CHANGE CHANGE to enable TelNet. CHANGE
TelNet active:
NEXT
• Press NEXT NEXT NEXT NEXT to save and move on to the next menu item.
9.21

Service timer

The Service timer determines the performance of the network
connection. Default the Service timer is set to Automatic. Changing the
setting should only be done when advised by a service engineer to solve
problems.
Service timer:
NEXT
Press CHANGE CHANGE to change the Service timer.
CHANGE CHANGE
•
The following settings are available:
S1-S5, F1-F4 and U1-U4. Where S stands for Slow, F for Fast and U for
Ultra fast.
Press NEXT NEXT to save and move on to the next menu item.
NEXT NEXT
•
9.22

Monitor active

The monitor function allows you to listen to the conversations that take
place. This requires the RTR Call Monitor software, which connects with
the Call Recorder over the network.
Monitor active:
66 Call Recorder PRI manual © 2009-2014 Vidicode®
Yes
CHANGE
Auto
CHANGE
No
CHANGE
STOP
STOP
STOP