Table of Contents
Advertisement
The available options depend on the selection of Recording Source § 4.
Start Method options are discussed in § 4.1.1 , § 4.2.1and § 4.3.
• Press NEXT
NEXT to move on to the next menu item.
NEXT
NEXT
12.3 Telephone settings
Telephone settings
NEXT
MENU
• Press MENU
MENU to enter the Telephone settings menu.
MENU
MENU
The first item in the Telephone Settings is the Telephone mode.
Telephone mode:
• Press CHANGE
CHANGE
CHANGE to enable or disable the telephone function (See
CHANGE
also § 7 ) of the Single II.
If you select Telephone mode: Off
• Press BACK
BACK
BACK
BACK to move on to the next menu. (go to § 12.4)
If you select Telephone mode: On
• Press NEXT
NEXT to go to the next menu item
NEXT
NEXT
12.3.1
External handset:
NEXT
• Press CHANGE
CHANGE to toggle On and Off
CHANGE
CHANGE
• Press NEXT
NEXT to go to the next menu item.
NEXT
NEXT
Manual Call Recorder Single II © 2011-2014 Vidicode®
CHANGE
External handset
CHANGE
STOP
Off
BACK
Off
BACK
51
Advertisement
Table of Contents
Need help?
Do you have a question about the Call Recorder Single II and is the answer not in the manual?
Questions and answers
we try call in but caller number no appear
The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:
1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.
Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.
This answer is automatically generated