Table of Contents
Advertisement
Footswitch:
• Press CHANGE
CHANGE
CHANGE to enable Footswitch
CHANGE
Footswitch is the last menu item in the Recorder Settings.
Footswitch
Footswitch
Footswitch
• Press BACK
BACK to exit
BACK
BACK
• Press STOP
STOP to exit the Recorder settings menu.
STOP
STOP
You will be prompted to SAVE or CANCEL changes made.
• Press NEXT
NEXT to move on to the Network settings.
NEXT
NEXT
12.5 Network settings
Network Settings
NEXT
• Press MENU
MENU to enter the Network Settings menu.
MENU
MENU
12.5.1
Network active
The first item in the Network Settings is the Network active item.
Network active:
NEXT
• Press CHANGE
CHANGE to enable the network, it is only then that the
CHANGE
CHANGE
option NEXT
NEXT appears in the display.
NEXT
NEXT
• Press NEXT
NEXT to move on to the next menu item.
NEXT
NEXT
12.5.2
FTP active
FTP stands for File Transfer Protocol. This is the protocol used by the
Single II to communicate over the network. This is a protocol that is also
used for internet.
Manual Call Recorder Single II © 2011-2014 Vidicode®
CHANGE
Footswitch use.
Footswitch
Footswitch
MENU
CHANGE
On
BACK
STOP
No
BACK
63
Advertisement
Table of Contents
Need help?
Do you have a question about the Call Recorder Single II and is the answer not in the manual?
Questions and answers
we try call in but caller number no appear
The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:
1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.
Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.
This answer is automatically generated