Table of Contents
Advertisement
Password:
NEXT
For every time the Password protection is enabled a new password has
to be entered. This is to prevent the password protection to be enabled
without the password being known.
• Press NEXT
NEXT
NEXT
NEXT to move on to the next menu item.
12.8 Language
Language:
NEXT
• Press CHANGE
CHANGE to scroll through the available options.
CHANGE
CHANGE
Together with the Language the date format can change also:
Standard date format is: DD-MM-YY
When set to "American" the format is changed to : MM-DD-YY
When set to American the format is changed to: MM-DD-YY
12.9 Reset all Values
The Reset all values prompt is used to revert the Single II to factory
settings.
Warning: Reverting to factory settings may cause personal settings to be
lost.
Reset all values:
NEXT
• Press CHANGE
CHANGE to enable Reset all values operation.
CHANGE
CHANGE
Reset all Values is the last item in the settings.
• Press BACK
BACK to exit
BACK
BACK
• Press STOP
STOP to exit the Network settings menu.
STOP
STOP
You will be prompted to SAVE or CANCEL changes made
72
Manual Call Recorder Single II © 2011-2014 Vidicode®
CHANGE
STOP
English
CHANGE
STOP
CHANGE
STOP
On
No
Advertisement
Table of Contents
Need help?
Do you have a question about the Call Recorder Single II and is the answer not in the manual?
Questions and answers
we try call in but caller number no appear
The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:
1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.
Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.
This answer is automatically generated