Table of Contents
Advertisement
Use DHCP server:
NEXT
• Press CHANGE
CHANGE
CHANGE
CHANGE to enable DHCP server.
• Press NEXT
NEXT to move on to the next menu item.
NEXT
NEXT
12.5.7
IP address
As part of the network the Single II needs an IP address. When a DHCP
server is used (see previous item) the DHCP server will assign an IP
address to the Single II.
If "Use DHCP server" is set to "NO" a static IP address must be given to
the Single II.
IP addr: 0.0.0.0
NEXT
• Press CHANGE
CHANGE to enter the IP address of the Single II.
CHANGE
CHANGE
IP addr: 000.000.000.000
STORE
Use the numerical keys to enter the IP address of the Single II.
• Press STORE
STORE
STORE to save the IP address of the Single II.
STORE
• Press NEXT
NEXT to move on to the next menu item.
NEXT
NEXT
12.5.8
IP subnet mask
The IP subnet mask is used by the Single II if access from outside the
network is required. In this case the Gateway will need to be entered as
well. In case the used SMTP server is not on the local network the IP
mask and gateway need to be entered.
66
Manual Call Recorder Single II © 2011-2014 Vidicode®
CHANGE
CHANGE
CANCEL
No
BACK
BACK
Advertisement
Table of Contents
Need help?
Do you have a question about the Call Recorder Single II and is the answer not in the manual?
Questions and answers
we try call in but caller number no appear
The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:
1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.
Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.
This answer is automatically generated