Monitor Active - Vidicode Octo Manual

10.22
The monitor function allows you to listen in to the conversations that
take place using the Call Recorder. This is done remotely with the RTR
Call Monitor software, which connects with the Call Recorder over the
network. This option enables this recorder to be accessible to the RTR
Call Monitor software.

Monitor active:

Press CHANGE CHANGE to enable the Monitor.
CHANGE CHANGE
•
Press NEXT NEXT to move on to the setting of the Monitor password. NEXT NEXT
•
The monitor password is a special password that is used to log on to the
Call Recorder. This password is also set in the RTR Call Monitor software.
Monitor pwd:
Press CHANGE CHANGE to enter a password
CHANGE CHANGE
•
Press BACK BACK to exit the network setting menu
BACK BACK
•
Manual Call Recorder Octo | Quarto © Vidicode 2010
Monitor active
0000
No
CHANGE
CHANGE
STOP
STOP
75