Table of Contents
Advertisement
IP mask: 255.255.255.000
NEXT
Press CHANGE
CHANGE
CHANGE to change the IP subnet mask of the Single II.
CHANGE
IP mask: 255.255.255.000
STORE
Use the numerical keys to enter the IP subnet mask of the Single II.
• Press STORE
STORE to save the IP subnet mask of the Single II.
STORE
STORE
• Press NEXT
NEXT
NEXT
NEXT to move on to the next menu item.
12.5.9
Gateway
The Single II uses the Gateway if access from outside the network is
required. If so both the Gateway and the IP subnet mask must be
entered. For instance, if the used SMTP server (e-mail server) is not on
the local network the IP mask and gateway are required.
Gateway: 0.0.0.0
NEXT
• Press CHANGE
CHANGE
CHANGE to enter the Gateway of the Single II.
CHANGE
Gateway: 200.000.000.000
STORE
Use the numerical keys to enter the Gateway of the Single II.
• Press STORE
STORE to save the Gateway of the Single II.
STORE
STORE
• Press NEXT
NEXT to move on to the next menu item.
NEXT
NEXT
Manual Call Recorder Single II © 2011-2014 Vidicode®
CHANGE
CANCEL
CHANGE
CANCEL
BACK
BACK
67
Advertisement
Table of Contents
Need help?
Do you have a question about the Call Recorder Single II and is the answer not in the manual?
Questions and answers
we try call in but caller number no appear
The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:
1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.
Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.
This answer is automatically generated