Service Timer; Monitor Active - Vidicode SD2750 Manual

11.21

Service timer

The Service timer determines the performance of the network
connection. Default the Service timer is set to Automatic. Changing the
setting should only be done when advised by a service engineer to solve
problems.
Service Timer: Auto
NEXT
Press CHANGE CHANGE to change the Service timer.
CHANGE CHANGE
•
The following settings are available: S1-S5, F1-F3 and U1-U3.
Where S stands for Slow, F for Fast and U for Ultra fast.
Press NEXT NEXT to save and move on to the next menu item. NEXT NEXT
•
11.22

Monitor active

The monitor function allows you to listen to the conversations that take
place. This requires the RTR Call Monitor software, which connects with
the recorder over the network.
Monitor active: No
Press CHANGE CHANGE to enable the Monitor. CHANGE CHANGE
•
Press NEXT NEXT to move on to the Monitor password.
NEXT NEXT
•
The monitor password is used to log on to the recorder. This password
must also be set in the RTR Call Monitor software.
Monitor pwd: 0000
Press CHANGE CHANGE to enter a password
CHANGE CHANGE
•
Press STOP STOP to exit the network setting menu STOP STOP
•
60 Call Recorder Single Digital manual ©Vidicode 2011-2014
CHANGE
CHANGE
CHANGE
STOP
STOP
STOP