Table of Contents
Advertisement
• Press the far right menu key.
Answering machine
ON
• Press ON
ON to turn the answering machine On.
ON
ON
To disable the answering machine follow the instructions as above and
press OFF
OFF to turn the answering machine Off.
OFF
OFF
8.2 Record a message
The Welcome message is the message the Single II answers an incoming
call with when the answering machine is turned on.
• Press the Playback / Search message key
Playback Message
DISK SD-CARD WELCOME
• Press WELCOME
WELCOME to enter the Welcome message menu.
WELCOME
WELCOME
In the Single 30 different messages can be recorded to be set as default
welcome message.
• Enter the Code of the welcome message that you want to record
using the numerical keys. Press 0-9 for welcome messages 0-9.
Press
0- 9 for welcome messages 10-19. Press #0-#9 for welcome
messages 20-29. For the example we will record welcome message
15 ( 5).
Welcome Message 15
SYSTEM
• Press
• Press
• Press
record the message again as described above.
Manual Call Recorder Single II © 2011-2014 Vidicode®
OFF
DELETE
to start the recording of the welcome message.
to stop the recording.
to listen to the recording before saving. It is possible to
STOP
STOP
STOP
37
Advertisement
Table of Contents
Need help?
Do you have a question about the Call Recorder Single II and is the answer not in the manual?
Questions and answers
we try call in but caller number no appear
The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:
1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.
Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.
This answer is automatically generated