Table of Contents
Advertisement
Select DISK
DISK
DISK
DISK
•
Use the numerical keys to enter a date.
•
Entering the date or code to search for you can use the
wildcard. For example enter
November 2009. The
left or right.
31-07-11 09:48
SEARCH
Press the
•
11 Recordings to SD.
Press SEARCH
SEARCH to start copying the recordings.
SEARCH
SEARCH
•
Press CANCEL
CANCEL to cancel the copy.
CANCEL
CANCEL
•
6.3
Copy an individual recording during
playback
First select the recording you want to copy as described in chapter § 5.1.
Press
to start the playback then press the
Copy Recording to SD-card
START
Press START
START to start copying the recording.
START
START
•
32
Manual Call Recorder Single II © 2011-2014 Vidicode®
:11:09 to search for all recordings from
and
CODE
DELETE
function key to open the Copy mode and copy all
keys can be used to move the cursor
1/11
STOP
CANCEL
key as
function key.
Advertisement
Table of Contents
Need help?
Do you have a question about the Call Recorder Single II and is the answer not in the manual?
Questions and answers
we try call in but caller number no appear
The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:
1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.
Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.
This answer is automatically generated