Table of Contents
Advertisement
- DTMF-ring,
- FSK-pola.
- FSK-ring
- DTMF Hi imp
You can also turn the Caller ID Off.
• Press NEXT
NEXT
NEXT
NEXT to move on to the next menu item.
12.3.5
K-break detection
This menu item will only appear when the Single II language is set to
English. K-break detection is specific for the UK.
K-break detection:
NEXT
• Press CHANGE
CHANGE to enable or disable K-break detection.
CHANGE
CHANGE
This service needs to be supported by your PABX or your telephone
service provider.
• Press NEXT to move on to the next menu item.
12.3.6
Rings to answer on
Sets the amount of rings before the Single II answers the phone.
This option is only used when you want the call recorder to act as an
answering machine.
Rings to answer on:
NEXT
• Press – – – – or +
or + to change the Ring volume property.
or +
or +
• Press NEXT
NEXT to move on to the next menu item.
NEXT
NEXT
12.3.7
Rings always answer
Set the amount of rings before the Single II answers the phone when
the answering machine is off. After picking up the phone the answering
machine is automatically turned on. If you don't want the Single II to
answer the phone when the answering machine is off select Off.
Manual Call Recorder Single II © 2011-2014 Vidicode®
CHANGE
- CHANGE +
No
BACK
1
BACK
Off.
Off.
Off.
53
Advertisement
Table of Contents
Need help?
Do you have a question about the Call Recorder Single II and is the answer not in the manual?
Questions and answers
we try call in but caller number no appear
The caller number may not appear on the Vidicode Call Recorder Single II due to several possible reasons:
1. Caller ID Not Enabled: The device may not have Caller ID functionality enabled in its settings.
2. Unsupported Phone Line: The telephone line may not support Caller ID transmission.
3. Signal Issues: Poor signal quality or interference could prevent the caller number from being detected.
4. Incorrect Configuration: The recorder may not be properly configured to capture Caller ID information.
5. Blocked Caller ID: The caller may have blocked their number from being displayed.
6. Compatibility Issues: Some telephone models may not transmit Caller ID in a format compatible with the recorder.
Checking the device settings and ensuring Caller ID is supported and enabled can help resolve the issue.
This answer is automatically generated