Parameter Description; Common Parameters - Siemens MICROMASTER 440 Parameter Manual

Issue 01/06
3

Parameter Description

Note
Level 4 Parameters are not visible with BOP or AOP.
3.1

Common parameters

r0000 Drive display
P-Group: ALWAYS
Displays the user selected output as defined in P0005.
Note:
Pressing the "Fn" button for 2 seconds allows the user to view the values of DC link voltage, output
frequency, output voltage, output current, and chosen r0000 setting (defined in P0005).
r0002 Drive state
P-Group: COMMANDS
Displays actual drive state.
Possible Settings:
0 Commissioning mode (P0010 != 0)
1 Drive ready
2 Drive fault active
3 Drive starting (DC-link precharging)
4 Drive running
5 Stopping (ramping down)
Dependency:
State 3 visible only while precharging DC link, and when externally powered communications board is fitted.
P0003 User access level
CStat: CUT
P-Group: ALWAYS
Defines user access level to parameter sets. The default setting (standard) is sufficient for most simple
applications.
Possible Settings:
0 User defined parameter list - see P0013 for details on use
1 Standard: Allows access into most frequently used parameters.
2 Extended: Allows extended access e.g. to inverter I/O functions.
3 Expert: For expert use only.
4 Service: Only for use by authorized service personal - password protected.
P0004 Parameter filter
CStat: CUT
P-Group: ALWAYS
Filters available parameters according to functionality to enable a more focussed approach to
commissioning.
Possible Settings:
0 All parameters
2 Inverter
3 Motor
4 Speed sensor
5 Technol. application / units
7 Commands, binary I/O
8 ADC and DAC
10 Setpoint channel / RFG
12 Drive features
13 Motor control
20 Communication
21 Alarms / warnings / monitoring
22 Technology controller (e.g. PID)
Example:
P0004 = 22 specifies that only PID parameters will be visible.
MICROMASTER 440 Parameter List
6SE6400-5BB00-0BP0
Datatype: U16 Unit: -
Datatype: U16 Unit: -
Datatype: U16 Unit: -
Active: first confirm QuickComm.: No
Datatype: U16 Unit: -
Active: first confirm QuickComm.: No
Parameter Description
Level
Min: -
1
Def: -
Max: -
Level
Min: -
2
Def: -
Max: -
Level
Min: 0
1
Def: 1
Max: 4
Level
Min: 0
1
Def: 0
Max: 22
25