Operators Used In The Parameter List To Represent Mathematical Interrelationships - Siemens MICROMASTER 440 Parameter Manual

Parameters
13. Description
The parameter description consists of the sections and contents listed below.
Some of these sections and contents are optional and will be omitted on a case-
to-case basis if not applicable.
Description:
Diagram:
Settings:
Example:
Dependency:
Warning / Caution / Notice / Note:
More details:
Operators
The following operators are used in the parameter list to represent mathematical
interrelationships:
Arithmetic operators
+ Addition
- Subtraction
* Multiplication
/ Division
Comparison operators
> Greater than
>= Greater than / equal to
< Less than
<= Less than / equal to
Equivalence operators
== Equal to
!= Not equal to
Logical operators
&& AND logic operation
|| OR logic operation
14
Brief explanation of the parameter function.
Where applicable, diagram to illustrate the effects of parameters on a
characteristic curve, for example
List of applicable settings. These include
Possible settings, Most common settings, Index and Bitfields
Optional example of the effects of a particular parameter setting.
Any conditions that must be satisfied in connection with this parameter. Also
any particular effects, which this parameter has on other parameter(s) or which
other parameters have on this one.
Important information which must be heeded to prevent personal injury or
damage to equipment / specific information which should be heeded in order to
avoid problems / information which may be helpful to the user
Any sources of more detailed information concerning the particular parameter.
Issue 01/06
MICROMASTER 440 Parameter List
6SE6400-5BB00-0BP0