Fixed Frequencies; Fixed Frequency 1 - Siemens MICROMASTER 440 Parameter Manual

Issue 01/06
3.17

Fixed frequencies

P1001[3]

Fixed frequency 1

CStat: CUT
P-Group: SETPOINT
Defines fixed frequency setpoint 1.
There are three options available for selection of the fixed frequencies:
1. Direct selection
2. Direct selection + ON command
3. Binary coded selection + ON command
1. Direct selection (P0701 - P0706 = 15):
- In this mode of operation 1 digital input selects 1 fixed frequency.
- If several inputs are active together, the selected frequencies are summed.
- E.g.: FF1 + FF2 + FF3 + FF4 + FF5 + FF6.
2. Direct selection + ON command (P0701 - P0706 = 16):
- The fixed frequency selection combines the fixed frequencies with an ON command.
- In this mode of operation 1 digital input selects 1 fixed frequency.
- If several inputs are active together, the selected frequencies are summed.
- E.g.: FF1 + FF2 + FF3 + FF4 + FF5 + FF6.
3. Binary coded selection + ON command (P0701 - P0706 = 17):
- Up to 16 fixed frequencies can be selected using this method.
- The fixed frequencies are selected according to the following table:
Index:
P1001[0] : 1st. Drive data set (DDS)
P1001[1] : 2nd. Drive data set (DDS)
P1001[2] : 3rd. Drive data set (DDS)
Example:
Binary coded selection :
0 Hz FF0
P1001 FF1
P1002 FF2
P1003 FF3
P1004 FF4
P1005 FF5
P1006 FF6
P1007 FF7
P1008 FF8
P1009 FF9
P1010 FF10
P1011 FF11
P1012 FF12
P1013 FF13
P1014 FF14
P1015
FF15
MICROMASTER 440 Parameter List
6SE6400-5BB00-0BP0
Datatype: Float
Active: Immediately
DIN4 DIN3 DIN2
0 0 0
0 0 0
0 0 1
0 0 1
0 1 0
0 1 0
0 1 1
0 1 1
1 0 0
1 0 0
1 0 1
1 0 1
1 1 0
1 1 0
1 1 1
1 1 1
Parameter Description
Min: -650.00
Unit: Hz Def: 0.00
QuickComm.: No Max: 650.00
DIN1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Level
2
113