Sip Settings - Patton SmartNode SN101/1JS/E User Manual

SmartNode 100 Series ATA User Manual
Go to the appropriate section to modify SIP or QoS settings:

"SIP Settings"

•
"QoS" on page 86
•
SIP Settings
SIP is a request-response protocol that deals with requests from clients and responses from servers. Participants
are identified by SIP URLs. Requests can be sent through any transport protocol. SIP determines the end sys-
tem to be used for the session, the communication media, and media parameters, and the called party's desire
to engage in the communication. Once these are assured, SIP establishes call parameters at either end of the
communication, and handles call transfer and termination.
The SIP Settings window displays the following:
SIP account information (whether the account is active, the account name, user ID, and proxy server address).
•
SIP settings can be modified by clicking on the Modify button for the appropriate account (see section
SIP Settings window"
Click the Active check box to activate or deactivate a SIP account. Click the
Note
Apply button to save and apply the change.
Once you are satisfied with the settings for a SIP account, if the ATA has
Note
another SIP account, you can click on the CopyToSIP2 button to copy the
SIP
Figure 52. QoS window
on page 66 for more information).
6 • VoIP Settings
"Edit
76