Configuring Mac Filtering Settings; Ip Filtering Window - Patton SmartNode SN101/1JS/E User Manual

SmartNode 100 Series ATA User Manual 7 • Security Settings
Figure 71. IP Filtering window
3. Enable/Disable IP Filtering: The IP address filter function may be enabled to restrict certain IPs from the
LAN accessing the Internet for a specific protocol.
4. The comment field may be used for reference purposes such as "Storage Room PC"
5. When you are satisfied with the settings, click the Apply button to save and apply the changes.
))

Configuring MAC Filtering settings

Entries in the table (see figure 72 on page 115) are used to restrict MAC addresses from the LAN accessing the
Internet.
Do the following to display MAC Filtering settings:
1. Click on the plus button next to Security to display the sub-categories (see figure 70 on page 113).
2. Click Firewall. The IP Filtering window displays (see figure 71 on page 114).
3. Click the MAC Filtering tab to bring it to the front (see figure 72 on page 115).
Firewall 114