Configuring Port Filtering Settings; Mac Filtering Window - Patton SmartNode SN101/1JS/E User Manual

SmartNode 100 Series ATA User Manual
4. Enable/Disable MAC Filtering: Enable/Disable MAC filtering: Specify which MAC addresses are not
allowed to access the Internet. The comment field may be used for reference purposes such as "Storage
Room PC".
5. When you are satisfied with the settings, click the Apply button to save and apply the changes.
))

Configuring Port Filtering settings

Entries in the table (see
from hosts in the LAN destined to the Internet.
Do the following to display Port Filtering settings:
1. Click on the plus button next to Security to display the sub-categories (see
2. Click Firewall. The IP Filtering window displays (see
3. Click the Port Filtering tab to bring it to the front (see
Firewall
Figure 72. MAC filtering window
figure 73 on page 116) are used to restrict traffic based on certain ports, originating
figure 70
figure 71 on page 114).
figure 73 on page 116).
7 • Security Settings
on page 113).
115