SmartNode 100 Series ATA User Manual
Table 5. Function/description of SN102/2JS/E ATA rear panel connectors/button
Callout
Label
1
Power
2
Reset
3
WAN
4
LAN
5
Phone1
6
Phone2
Table 6. Function/description of SN102/1JS1JO/E ATA rear panel connectors/button
Callout
Label
1
Power
2
Reset
3
WAN
Front Panel LED Indicators & Rear Panels
Figure 5. SN102/2JS/E ATA rear panel
Color
N/A
Connects to the power adapter
N/A
Using a paper clip or similar object, press this button briefly to restart
the unit. Press and hold for 10 seconds to restore the factory default
settings.
Gold
Connects to a PC by an Ethernet cable. This port enables your PC or
switch/hub to be connected to the ATA through a networking cable
with RJ-45 connectors used on 10Base-T and 100Base-TX networks.
Black
Connects to the network by an Ethernet cable. This port enables your
ATA to be connected to an Internet Access device, e.g. router, cable
modem, ADSL modem, through a networking cable with RJ-45 con-
nectors used on 10Base-T and 100Base-TX networks.
Gray
FXS port can be connected to analog telephone or fax machine by an
RJ-11 (Gray) analog line.
Gray
FXS port can be connected to analog telephone or fax machine by an
RJ-11 (Gray) analog line.
Figure 6. SN102/1JS1JO/E ATA rear panel
Color
N/A
Connects to the power adapter
N/A
Using a paper clip or similar object, press this button briefly to restart
the unit. Press and hold for 10 seconds to restore the factory default
settings.
Gold
Connects to a PC by an Ethernet cable. This port enables your PC or
switch/hub to be connected to the ATA through a networking cable
with RJ-45 connectors used on 10Base-T and 100Base-TX networks.
1 • General information
Description
Description
20