Introduction; Configuring The Sn100 To Communicate With Your Computer - Patton SmartNode SN101/1JS/E User Manual

SmartNode 100 Series ATA User Manual

Introduction

This chapter describes using the Connection Setup and VoIP Setup wizards to quickly configure the ATA for
operation.

Configuring the SN100 to communicate with your computer

By default, the SN100 is configured for the following network environment:
WAN type: DHCP client
•
• LAN IP: 192.168.1.1
LAN subnet mask: 255.255.255.0
•
Do the following:
1. Configure the network interface of your computer to be the DHCP client. It will obtain an IP address
from the SmartNode ATA automatically.
2. Using a Web browser (Microsoft Edge, Google Chrome, etc.) link to URL http://192.168.1.1. A login
window displays (see
Most examples of SN100 screens in this manual are from an SN102/2JS/E
Note
(ATA with 2 FXS ports). Where differences are relevant, screens from other
SN100 models will be shown.
3. Type the default user name in the Username box: admin
4. Type the default password in the Password box: admin
5. Click the Login button. The Please select Wizard or Advanced mode window displays (see
page 31).

Introduction

figure 9).
Figure 9. Login window
3 • Quick Start
figure 10 on
30