SmartNode 100 Series ATA User Manual
8 • Maintenance Settings
Figure 80. Dynamic DNS window
4. Click the check-box to enable or disable the DDNS service (default setting is disable).
5. Click the Service Provider drop-down menu to select the desired DDNS service provider.
6. Type the hostname you registered at the DynDns.org or TZO.net website in the Domain Name box.
7. Type username you registered at the DynDns.org or TZO.net website in the User Name/Email box.
8. Type the password you registered at the DynDns.org or TZO.net website in the Password/Key box.
9. In case your service at DynDNs.org or TZO.net includes a fixed IP address, you may enter this one in to
the corresponding field. When doing so, make sure you set the radio button for that field as well.
10. When you are satisfied with the settings, click the Apply button to save and apply the changes.
))
Configuring TR069 settings
TR-069 is a DSL Forum specification for CPE WAN Management Protocol (CWMP). It defines an applica-
tion layer protocol for remote management of end-user devices. As a bidirectional SOAP/HTTP-based proto-
col, it provides the communication between customer-premises equipment (CPE) and Auto Configuration
Servers (ACS).
Do the following to display TR069 settings:
1. Click on the plus button next to Maintenance to display the sub-categories (see
figure 76
on page 120).
2. Click System. The General window displays (see
figure 77
on page 121).
3. Click the TR069 Setting tab to bring it to the front (see
figure 81
on page 126).
System
125