SmartNode 100 Series ATA User Manual
2. Click Tools. The Configuration window displays (see
3. Click the Restart tab to bring it to the front (see
4. Click the Restart button to have the device perform a software restart. Verify that the Power LED blinks as
the device restarts and then stays on once the restart is completed.
5. Restart is successful.
Logs
To keep a log of SN100 activities, do the following:
1. Click on the plus button next to Maintenance to display the sub-categories (see
2. Click Tools. The Configuration window displays (see
3. Click the Logs tab to bring it to the front. The System Log window displays. (see
Logs
figure 82
figure
85).
Figure 85. Restart window
figure
82).
8 • Maintenance Settings
on page 128).
figure 76
figure 86
on page 120).
on page 132).
131