Sip Advanced - Patton SmartNode SN101/1JS/E User Manual

SmartNode 100 Series ATA User Manual
Block Anonymous Call setting (see section
•
• Codec settings (see section
This section displays the following;

SIP Advanced.

SIP Port Number: Assign the SIP port number of the ATA. The default setting is 5060.
•
• Media Port: Port number for sending RTP packets. The default setting is 9000.
Packetization: Select the voice codec packetization interval in milliseconds. The default is 30 ms (for terrestrial
•
connection it is 20ms). This is used to minimize loss that happens during transmission of voice data over the
network.
DTMF Relay: Click the drop-down menu to select RFC2833, SIP INFO, or PCM as indicated by your ISP.
•
RFC2833 Payload Type: Sending the DTMF tone as an RTP payload signal.
•
• SIP INFO Duration (ms): Modify SIP INFO duration time.
))
Call wait time (seconds)
•
Call Waiting: Click the check box to enable call waiting if the user wants to be informed when there is a new
•
incoming call while he or she is on another call. Disable the feature if the user doesn't want to be informed of a
new incoming call.
DNS SRV: Click the check box to enable having the ATA query your ISP's DNS server for a list of available
•
SIP servers that it maintains.
Prohibit coming calls from other SIP server: Enable or disable prohibiting incoming calls from other SIP serv-
•
ers.
Send SIP keep-alives (seconds)
•
When you are satisfied with the settings, click the Apply button to save and apply the changes.
))
SIP
"Block Anonymous Call"
"Codec Setting" on page 73)
6 • VoIP Settings
on page 73)
70