Configuring User Account's User Name And Password; Configuring Time Settings; Time Setting Window - Patton SmartNode SN101/1JS/E User Manual

SmartNode 100 Series ATA User Manual

Configuring User Account's user name and password

This section describes setting the user account's user name and password. This account has limited capabilities
in that it only allows changing network settings.
Do the following to display General settings:
1. Click on the plus button next to Maintenance to display the sub-categories (see
2. Click Maintenance. The Gemeral window displays (see
3. In the User Account section, click the User Name box, then type a new user name.
4. Click the User Password box, then type a new password.
5. When you are satisfied with the settings, click the Apply button to save and apply the changes.

Configuring Time settings

You can maintain the system time by synchronizing with a public time server over the Internet.
Do the following to display Time settings:
1. Click on the plus button next to Maintenance to display the sub-categories (see
2. Click System. The General window displays (see
3. Click the Time Setting tab to bring it to the front (see
4. Choose the desired time zone from the Time Zone Select drop down-menu
5. Enabling NTP client update let's the SN100 synchronize its clock automatically to the network time
server.
6. Click the check box to enable the Automatically Adjust Daylight Saving setting.
System
figure
figure 77 on page 121).
figure 78
Figure 78. Time Setting window
8 • Maintenance Settings
figure
77).
figure 76
on page 122).
76).
on page 120).
122