SmartNode 100 Series ATA User Manual
Dialing Parameter settings
If no other number is being dialed within this interval, the SN100 will terminate the call. Assign the time inter-
val from 1 to 9 seconds.
z
When you are satisfied with the settings, click the Apply button to save and apply the changes.
))
Off-Hook Alarm settings
The amount of time the phone can be off-hook before an alarm sounds.
z
When you are satisfied with the settings, click the Apply button to save and apply the changes.
))
DTMF Detection Threshold settings
Type the DTMF Detection Threshold Level value.
z
When you are satisfied with the settings, click the Apply button to save and apply the changes.
))
Region window
The Region window displays the following;
Region settings (see section
•
Customer Ring settings (see section
•
Region settings
Adjust the tone frequency according to each country
1. Select the country from the drop-down menu
z
Phone
"Region settings"
on page 106)
"Customer Ring settings"
on page 107)
6 • VoIP Settings
106