SmartNode 100 Series ATA User Manual
Go to the appropriate section to modify analog phone, common, or region settings:
•
"Speed Dial window"
"Dial Plan with URL window"
•
Speed Dial window
Speed Dial lets you define a button or a set of buttons to link to numbers defined in the Speed Dial list.
1. If your SN100 ATA has only one FXS port, go to step 2. Otherwise, select Phone 1 or Phone 2 from the
Port Setting drop-down menu.
2. Position: Decide which speed dial shortcut to use from 01 to 10.
3. Name: Type a short name for the phone number shortcut.
4. Phone Number: Enter the desired phone number in the corresponding format that is required, using the ISP
of your preference.
5. Repeat steps 2 through 4 to create additional speed dialing shortcuts.
6. When you are satisfied with the settings, click the Apply button to save and apply the changes.
))
Dial Plan with URL window
Use this window to create dial plan with URL entries that enable users to make peer-to-peer calls. In peer-to-
peer calls, a user calls another VoIP device directly without going through a VoIP service provider's SIP server.
Enter the callee's IP address or domain name. The SN100 sends SIP INVITE requests to the specified peer
VoIP device when you dial the SIP number configured in this screen.
1. If your SN100 ATA has only one FXS port, go to step 2. Otherwise, select Phone 1 or Phone 2 from the
Port Setting drop-down menu.
Phone Book
on page 109
6 • VoIP Settings
109