SmartNode 100 Series ATA User Manual
3 • Quick Start
Configuring SN101/1JS/E (1 FXS) ATA VoIP settings
1. Click VOIP SETUP. The VoIP Configuration window displays (see
figure 16
on page 36). Do the following
to configure Phone 1 SIP settings:
Figure 16. VoIP Configuration window
2. Type the SIP number that was provided by your ISP in the SIP Number box.
3. Type the proxy address that was provided by your ISP in the SIP Server Address box.
4. Type the SIP domain that was provided by your ISP in the SIP Service Domain box.
5. Type the user name that was provided by your ISP in the Username box.
6. Type the password that was provided by your ISP in the Password box.
VoIP set up
36