SmartNode 100 Series ATA User Manual
Introduction
This chapter describes the following:
Configuring the WAN interface (see section
•
Configuring the LAN interface (see section
•
•
Configuring NAT (see section
WAN Interface
Do the following to display WAN settings:
1. Click on the plus button next to Network to display the sub-categories (see
2. Click WAN. The Internet Connection window displays (see
Introduction
"WAN
Interface")
"LAN Interface"
"NAT Port Forwarding"
Figure 40. Network sub-categories
Figure 41. Internet Connection window
on page 57)
on page 59)
figure
figure
41).
5 • Network Settings
40).
54