Introduction; Sip; Configuring Sn101/1Js/E (1 Fxs) Ata Sip Settings; Sn101/1Js/E Voip Sub-Categories - Patton SmartNode SN101/1JS/E User Manual

SmartNode 100 Series ATA User Manual

Introduction

This chapter describes the following:
Configuring session initiation protocol (SIP) and quality of service (QoS) settings (see section "SIP")
•
Configuring analog phone settings (see section
•
• Configuring speed-dial settings (see section
Configuring public switched telephone network (PSTN) line settings on the SN102/1JS1JO (FXS/FXO
•
model) (see section "PSTN Line"

SIP

This section describes configuring SN100 Series ATA SIP and QoS settings. Chose the appropriate section
from the following:

"Configuring SN101/1JS/E (1 FXS) ATA SIP settings"

•
"Configuring SN102/2JS/E (2 FXS) ATA SIP settings"
•
• "Configuring SN102/1JS1JO/E (1 FXS/1 FXO) ATA SIP settings"

Configuring SN101/1JS/E (1 FXS) ATA SIP settings

Do the following to display SIP and QoS settings:
1. Click on the plus button next to VoIP to display the sub-categories (see
2. Click SIP. The SIP Settings window displays (see

Introduction

"Phone"
"Phone Book"
on page 111)
Figure 45. SN101/1JS/E VoIP sub-categories
figure 46
on page 99)
on page 107)
on page 63
on page 75
on page 87
figure
on page 64).
6 • VoIP Settings
45).
63