Acl Setting Window - Patton SmartNode SN101/1JS/E User Manual

SmartNode 100 Series ATA User Manual
3. Make the following settings in the ACL Setup section:
– Enable/Disable the LAN and WAN HTTP service as needed (default setting is enable).
– Enable/Disable the LAN and WAN TELNET service as needed (default setting is enable).
4. Enable/Disable the From LAN setting (default setting is enable).
5. When you are satisfied with the settings, click the Apply button to save and apply the changes.
))
ACL Setting
Figure 75. ACL Setting window
7 • Security Settings
118