The Storeonce Gui; User Roles And Accounts - HP StoreOnce 2700 Installation And Configuration Manual

1. StoreOnce CLI commands require an SSH client application (freely available from the internet)
and must be run from a SSH terminal session on a machine that is on the same network as
the StoreOnce appliance:
ssh <username>@<ip_address>
NOTE:
Monitor) attached to the appliance, for example, if the network is not yet configured.
2. At the prompts provide a User Name and Password (Admin, admin).

The StoreOnce GUI

The HP StoreOnce Management Console (GUI) is the main interface for:
Monitoring the status and health of the HP StoreOnce Backup system and all configured backup
devices.
Creating and modifying VTL and NAS StoreOnce backup targets and Catalyst stores (VTL and
NAS backup targets may also be created and managed using the StoreOnce CLI).
Managing replication relationships and housekeeping.
Setting up Remote Support.
To log on to the Management Console using the StoreOnce GUI, use any machine connected to
the same network as the appliance. The HP StoreOnce Backup system uses a secure network
connection.
1. Enter: https://<IP_address>
You may also use the Fully Qualified Domain Name (FQDN)
NOTE:
network connection.
2. The StoreOnce Management Console displays the Login prompt. Provide a User Name and
Password (Admin, admin). You can also set the local language to display the text within
StoreOnce GUI from the Login screen.
IMPORTANT:
requires Active Scripting or JavaScript enabled. Without these scripts enabled, some browser
buttons may not display.

User roles and accounts

Two roles define the permissions associated with a user; admin and user. Two default user accounts,
one for each role, are created automatically when the system is installed.
Administrator: Authorized users can create and edit management and StoreOnce functions
via the GUI and CLI. The default login and password are Admin and admin. The permissions
role of the Administrator is admin.
Operator: This account limits access to the GUI and CLI to monitoring and viewing. The default
login and password are Operator and operator. The permissions role of the Operator is user.
It is good practice to determine what other users will be required and what access to the system
they should have as part of the planning process. In particular, will the HP StoreOnce Backup
system be added to an Active Directory Domain?
The following AD domain details will be required to configure AD.
The AD domain name and whether it is on an IPv4 or IPv6 network
The user name and password of the Domain Administrator or a delegated user with Domain
Administrative rights
26 Powering on and managing the StoreOnce Management system
StoreOnce CLI commands can also be run from a local console (Keyboard and
If you use http: in the URL, you are automatically forwarded to the https: secure
The web browser used to communicate with the HP StoreOnce Backup system