Ip Device Tracking - Cisco Catalyst 3750-X Command Reference Manual

ip device tracking

ip device tracking
To enable IP device tracking, use the ip device tracking global configuration command. Use the no form
of this command to disable this feature.
Syntax Description
This command has no arguments or keywords.
Command Default IP device tracking is disabled.
Command Modes Global configuration
Command History 12.2(53)SE2
Usage Guidelines
When IP device tracking is enabled, you can set the IP device tracking probe interval, count, and
configure the ARP probe address with the ip device tracking probe command.
Use the show ip device tracking all command to display information about entries in the IP device
tracking table. For more information about this command, see the Cisco IOS Security Command
Reference, Release 12.4T.
Examples
This example shows how to enable device tracking:
Switch(config)# ip device tracking
Switch(config)#
Related Commands Command
ip device tracking probe
show ip device tracking all
Catalyst 3750-X and 3560-X Switch Command Reference
2-260
ip device tracking
no ip device tracking
This command was introduced.
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Description
Configures the IP device tracking table for ARP probes.
Displays information about the entries in the IP device tracking
table.
OL-29704-01