IDK MSD-701UHD Command Reference Manual page 105

@GBA / @SBA
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description
Setting Command
example Response
Description
Remarks
@GPB / @SPB
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the bitmap that is output at startup.
Setting Command
example Response
Description OUT1: not output a bitmap at startup.
Remarks
MSD-701UHD / 702UHD / 801UHD/ 802UHD Command Guide
Assigning input channel
@GBA, ch
@GBA, ch, bitmap_1 (, bitmap_2, bitmap_3, bitmap_4, bitmap_5, bitmap_6,
bitmap_7, bitmap_8)
@SBA, ch_1, input_1, bitmap_1 (, ch_2, input_2, bitmap_2･･･)
@SBA, ch_1, input_1, bitmap_1 (, ch_2, input_2, bitmap_2･･･)
ch: Output channel
1 = OUT1, 2 = OUT2
ch_1-16: Output channel
0 = All outputs, 1 = OUT1, 2= OUT2
bitmap_1-16: Bitmap assignment
0 = NONE [Default], 1 = Bitmap 1,
3 = Bitmap 3,
Only registered numbers can be specified.
input_1-16: Input channel
0 = All inputs, 1 = IN1 to 8 = IN8
@GBA,1
@GBA,1,0,0,0,0,0,0,1,0
Getting the OUT1 bitmap assignment.
OUT1: bitmap 1 to IN7, other input channels: no bitmap is assigned.
@SBA,1,7,1
@SBA,1,7,1
Setting OUT1: Assigning bitmap 1 to IN7 (If IN7 is selected, bitmap 1 is output.)
－
Startup bitmap
@GPB
@GPB, out_1, out_2
@SPB, ch_1, out_1 (, ch_2, out_2)
@SPB, ch_1, out_1 (, ch_2, out_2)
out_1-2: Outputting bitmap image
0 = OFF [Default],
3 = Bitmap 3 ON,
Only registered numbers can be specified.
ch_1-2: Output channel
0 = All outputs, 1 = OUT1, 2 = OUT2
@GPB
@GPB,0,1
Bitmap 1 is output to OUT2.
@SPB,1,0
@SPB,1,0
－
2 = Bitmap 2,
4 = Bitmap 4
1 = Bitmap 1 ON,
4 = Bitmap 4 ON
2 = Bitmap 2 ON,
105