IDK MSD-701UHD Command Reference Manual page 53

@GVO / @SVO
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting video output connector.
Setting Command
example Response
Description Setting OUT1A to "1" (video is output).
Remarks
@GEN / @SEN
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the set HDCP output.
Setting Command
example Response
Description Setting OUT1A to HDCP 2.2.
Remarks
MSD-701UHD / 702UHD / 801UHD/ 802UHD Command Guide
Vidoe output connector
@GVO
@GVO, out_1A, out_1B, out_2A, out_2B
@SVO, ch_1, out_1 (, ch_2, out_2･･･)
@SVO, ch_1, out_1 (, ch_2, out_2･･･)
out_1A / out_2A : OUTA video output
out_1B / out_2B : OUTB video output
out_1-4 : Video output
0 = Not output, 1 = Output [Default]
ch_1-4: Output connector
0 = All outputs, 1 = OUT1A, 2 = OUT1B, 3 = OUT2A, 4 = OUT2B
@GVO
@GVO,0,1,1,1
OUT1A: not output video, other outputs: output video
@SVO,1,1
@SVO,1,1
－
HDCP output
@GEN
@GEN, hdcp_1, hdcp_2, hdcp_3, hdcp_4
@SEN, ch_1, hdcp_1 (, ch_2, hdcp_2, ch_3, hdcp_3, ch_4, hdcp_4 )
@SEN, ch_1, hdcp_1 (, ch_2, hdcp_2, ch_3, hdcp_3, ch_4, hdcp_4)
hdcp_1-4: HDCP output
0 = HDCP is encrypted only if input signal is with HDCP.
1 = HDCP 2.2 is preferentially encrypted. [Default]
2 = HDCP 1.4 is encrypted.
3 = HDCP is not encrypted.
ch_1-4: Output channel
0 = All outputs, 1 = OUT1A, 2 = OUT1B, 3 = OUT2A, 4 = OUT2B
@GEN
@GEN,1,0,0,0
OUT1A: HDCP 2.2 is preferentially encrypted.
Other output channels: HDCP is encrypted only if input signal is with HDCP.
@SEN,1,1
@SEN,1,1
－
53