Table of Contents
Advertisement
MSD-701UHD / 702UHD / 801UHD/ 802UHD Command Guide
@GEC / @SEC
Getting
Command
Response
Setting
Command
Response
Parameter
82
Control command (Communication command)
@GEC, no
@GEC, no, delay, port, memo, length, command, timeout, retry, interval,
retryover, display (, recv_1, recv_2･･･)
@SEC, no, delay, port, memo, length, command, timeout, retry, interval,
retryover, display (, recv_1, recv_2･･･)
@SEC, no, delay, port, memo, length, command, timeout, retry, interval,
retryover, display (, recv_1, recv_2･･･)
no: Control command number
1 to 32
delay: Delay time
0 = 0 sec. to 999999 = 999.999 sec.
port: Output port
1 to 8191
bit
7
6
LAN
LAN
port
4
3
bit
15
14
－
－
port
"1" is for the bit of the output port to send a command (Since bit 13-15 are not
used, they are always "0"). For example, if you want to send a command from
RS-232C CH1, specify "1". If sending a command from LAN 2, specify "32".
memo:
Up to 14 characters of 20 to 7D except 2C (,).
length: Data size of send command (the number of bytes)
0 to 30
command: Send command data
Specify length × 2 digits with 0 to 9, A to F, a to f: (4 bit per digit in
hexadecimal).
timeout: Time-out duration
0 = 0 sec. to 99999 = 99.999 sec.
retry: The number of retries
0 to 99
interval: Retry interval
0 = 0 sec. to 99999 = 99.999 sec.
retryover: Processing at retry over
0 = Stop processing, 1 = Continue processing
display: Displaying received data
0 = communication command control
recv_1-32: Presence or absence of response command check
1 to 32
For get commands, reply command numbers are separated from each other by a
comma.
For set commands, the reply command number to be checked can be specified.
Up to 32 commnads can be specified by separating them by a comma.
If you send only parameters of reply command number you want to check, the
reply commands without sent parameter are automatically set to "not check".
Register reply commands in "@GRC / @SRC Response command".
5
4
3
LAN
LAN
RS-232C
2
1
IN8
13
12
11
LOOP
LAN
－
BACK
8
2
1
0
RS-232C
RS-232C
RS-232C
OUT2B
OUT1B
CH1
10
9
8
LAN
LAN
LAN
7
6
5
Advertisement
Table of Contents
