Table of Contents
Advertisement
MSD-701UHD / 702UHD / 801UHD/ 802UHD Command Guide
@SPM
Setting
Command
Response
Parameter
Setting
Command
example
Response
Description Saving the current settings in preset memory 2 without changing the memory
Setting
Command
example
Response
Description Saving the current settings in preset memory 2 with the name of "MEMORY2".
Remarks
@SCP
Setting
Command
Response
Parameter
Setting
Command
example
Response
Description Copying OUT2's setting to OUT1.
Remarks
100
Saving all settings
@SPM, preset (, name)
@SPM, preset (, name)
preset: Preset memory
1 to 8
name: Memory name
Up to 10 characters using 20 to 7D from ASCII codes.
If you do not specify memory name, only crosspoint settings are saved without
changing the memory name.
@SPM,2
@SPM,2
name.
@SPM,2,MEMORY2
@SPM,2,MEMORY2
－
Copying output setting
@SCP, out_ori, out_des
@SCP, out_ori, out_des
out_ori: Source output channel
1 = OUT1 to 2 = OUT2
out_des: Destination output channel
1 = OUT1 to 2 = OUT2
@SCP,2,1
@SCP,2,1
Once output setting is copied, all settings related to output are copied.
Advertisement
Table of Contents
