Table of Contents
Advertisement
MSD-701UHD / 702UHD / 801UHD/ 802UHD Command Guide
@GCM / @ECM
Getting
Command
Response
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description
Setting
Command
example
Response
Description
Remarks
@RCV
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description Loading video channel of crosspoint memory 1.
Remarks
96
Editing crosspoint memory
@GCM, memory
@GCM, memory, v_1, a_1, v_2, a_2, name
@ECM, memory, v_1, a_1, v_2, a_2
@ECM, memory, v_1, a_1, v_2, a_2
memory : Crosspoint memory
1 to 9
v_1-2: Video channel
a_1-2: Audio channel
-1 = Not controlled [Default], 0 = OFF, 1 = IN1 to 8 = IN8
name: Memory name
Up to 10 characters using 20 to 7D from ASCII codes.
[Default] 20 (space)
@GCM,2
@GCM,2,3,3,1,1,PATTERN2
Getting the video and audio channels of crosspoint memory 2.
OUT1: IN3, OUT2: IN1 are saved with the name of "PATTERN2".
@ECM,2,1,1,-1,-1
@ECM,2,1,1,-1,-1
Setting the crosspoint memory 2 to:
OUT1: IN1, OUT2: Not controlled
Nothing is saved in the memory by factory default, the state is "-1" (Not
controlled). If you save only video (@SCV) or audio (@SCA) at the first saving of
crosspoint settings, "-1" (Not controlled) is returned to unsaved audio and video.
Loading crosspoint memory (setting video channel)
@RCV, memory
@RCV, memory
memory : Crosspoint memory
1 to 9
@RCV,1
@RCV,1
－
Advertisement
Table of Contents
