Table of Contents
Advertisement
@GTL / @STL
Getting
Command
Response
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description Getting the lighting condition of the COMMAND C.
Setting
Command
example
Response
Description Setting the COMMAND C to light while a command is being executed.
Remarks
MSD-701UHD / 702UHD / 801UHD/ 802UHD Command Guide
Lighting condition of execution button
@GTL, control_1 (, control _2･･･)
@GTL, control _1, led_1 (, control _2, led_2･･･)
@STL, control _1, led_1 (, control _2, led_2･･･)
@STL, control _1, led_1 (, control _2, led_2･･･)
control _1-9: Command execution button
0 = All command execution buttons
1 = COMMAND A to 9 = COMMAND I
led_1-9 : Lighting condition
If a control command(s) having only one PLANE, PLANE A or PLANE B is
linked to a control command execution button:
0 = Lights when a control command is registered. [Default]
1 = Lights while a control command is being executed.
If a control command(s) having two PLANEs, PLANE A and PLANE B is
linked to a control command execution button:
0 = A control command(s) that is linked to a button is executed by pressing
the desired button when the control command execution button
lights/blinks.
Lights: Control command registered to PLANE A.
Blinks: Control command registered to PLANE B.
1 = The control command that is linked to a button is executed by pressing
a desired button when the control command execution button
lights/goes out.
Lights: Control command registered to PLANE A
Goes out: Control command registered to PLANE B
@GTL,3
@GTL,3,0
The COMMAND C lights if a control command is registered.
(If one PLANE is linked)
@STL,3,1
@STL,3,1
(If one PLANE is linked)
COMMANDD to COMMAND I: Applied only for WEB browser
93
Advertisement
Table of Contents
