Table of Contents
Advertisement
MSD-701UHD / 702UHD / 801UHD/ 802UHD Command Guide
@GAD / @SAD
Getting
Command
Response
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description Getting the set channel switching mode to:
Setting
Command
example
Response
Description Setting the channel switching mode to:
Remarks
@GOA / @SOA
Getting
Command
Response
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description Getting long reach mode setting of OUT1B.
Setting
Command
example
Response
Description Setting long reach mode of OUT1B to ON.
Remarks
58
Channel switching mode for input channel automatic switching
@GAD
@GAD, mode_1, mode_2
@SAD, ch_1, mode_1 (, ch_2, mode_2)
@SAD, ch_1, mode_1 (, ch_2, mode_2)
mode_1-2: Channel switching mode
0 = VIDEO, 1 = AUDIO, 2 = V&A [Default]
ch_1-2: Output channel
0 = All outputs, 1 = OUT1, 2 = OUT2
@GAD
@GAD,2,1
OUT1: V&A, OUT2: AUDIO
@SAD,1,2,2,0
@SAD,1,2,2,0
OUT1: V&A, OUT2: VIDEO
－
HDBaseT output long reach mode
@GOA, ch
@GOA, ch, mode
@SOA, ch_1, mode_1 (, ch_2, mode_2)
@SOA, ch_1, mode_1 (, ch_2, mode_2)
ch: Output channel
1 = OUT1B, 2 = OUT2B
mode_1-2: Setting mode
0 = OFF [Default], 1 = ON
ch_1-2: Output channel
0 = All outputs (OUT1B, OUT2B), 1 = OUT1B, 2 = OUT2B
@GOA,1
@GOR,1,0
OUT1B: Long reach mode is set to OFF
@SOA,1,1
@SOA,1,1
If this menu is set to "ON", resolutions up to 1080p are supported. If it exceeds
1080p, signals cannot be received.
Advertisement
Table of Contents
