IDK MSD-701UHD Command Reference Manual page 52

MSD-701UHD / 702UHD / 801UHD/ 802UHD Command Guide
@GFT / @SFT
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description
Setting Command
example Response
Description
Remarks
@GWC / @SWC
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the set wipe color of OUT1.
Setting Command
example Response
Description Setting the wipe colors (RGB) of OUT1 to "255" (white).
Remarks
52
Video switching speed
@GFT
@GFT, time_1, time_2
@SFT, ch_1, time_1 (, ch_2, time_2)
@SFT, ch_1, time_1 (, ch_2, time_2)
time_1-2: Switching speed
100 = 0.1 sec. to 2000 = 2 sec.
[Default] 350 = 0.35 sec.
Set the value by 10 ms. If you set a value other than 0 for the lower 1 digits, these
values will be rounded down. (For example, if you set it to 395, the speed is set to
390 ms.)
ch_1-2: Output channel
0 = All outputs, 1 = OUT1, 2 = OUT2
@GFT
@GFT,400,400,350,350
Getting the set switching speed of video input channel.
OUT1: 400 ms, OUT2: 350 ms
@SFT,1,400
@SFT,1,400
Setting OUT1 switching time to 400 ms.
－
Wipe color
@GWC, ch
@GWC, ch, red, green, blue
@SWC, ch_1, red_1, green_1, blue_1 (, ch_2, red_2, green_2, blue_2)
@SWC, ch_1, red_1, green_1, blue_1 (, ch_2, red_2, green_2, blue_2)
ch: Output channel
1 = OUT1, 2 = OUT2
ch_1-2: Output channel
0 = All outputs, 1 = OUT1, 2 = OUT2
red / red_1-2 : Wipe color (Red)
green / green_1-2 : Wipe color (Green)
blue / blue_1-2 : Wipe color (Blue)
0 to 255 [Default] 0 (black)
@GWC,1
@GWC,1,255,255,255
RGB: 255 (white)
@SWC,1,255,255,255
@SWC,1,255,255,255
－