Table of Contents
Advertisement
@GSS
Parameter
Getting
Command
example
Response
Description Getting IN1 all statuses.
Remarks
MSD-701UHD / 702UHD / 801UHD/ 802UHD Command Guide
I/O status (cont'd)
Error code
Video output status
Signal that is not supported
7
by MSD series (dot clock is
out of range) is input.
8
-
9
-
A
Input channel is set to "OFF".
( @GSW / @SSW
Switching video and audio channel simultaneously,
@GSV / @SSV Switching video channel,
@GSA / @SSA Switching audio channel,)
B
-
C
No sink device is connected.
D
HDCP is being authorized.
E
HDCP authentication failed.
*8
Analog audio input status cannot be detected. Even if "0" is returned, audio may
not be output with analog input selected.
*9
Status only for HDMI / HDBaseT output connectors.
@GSS,1,0
@GSS,1,0,H30,1080P 60Hz,LINEAR PCM 48kHz,HDCP 1.4
・Input signal type: 30-BIT COLOR HDMI signal
・Video input signal: 1080P 60Hz
・Audio input signal: LINEAR PCM 48kHz
・HDCP: 1.4
－
Audio output status
Since compressed audio is
input, audio cannot be output
(Compressed audio can be
output only to sink devices
supporting compressed audio).
"@GDO / @SDO Audio output
connector" is set to "OFF".
"@GDM
/
@SDM
mode" is set to "DVI MODE" or
a sink device that does not
support audio is connected.
"@GAO / @SAO Digital audio
output connector" is set to
"OFF".
Output
*9
113
Advertisement
Table of Contents
