MSD-701UHD / 702UHD / 801UHD/ 802UHD Command Guide
@SIL
Setting
Command
Response
Parameter
Setting
Command
example
Response
Description Lowering IN1 audio input level (1 dB).
Remarks
@GIL
Getting
Command
Response
Parameter
Getting
Command
example
Response
Description Getting the set limit status of audio input level.
Remarks
@GLO / @SLO
Getting
Command
Response
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description Getting the set lip sync of the output side.
Setting
Command
example
Response
Description Setting the OUT1 lip sync to 2 frames.
Remarks
62
Relative value of audio input level
@SIL, ch_1, updown_1 (, ch_2, updown_2・・・)
@SIL, ch_1, updown_1 (, ch_2, updown_2・・・)
ch_1-8: Input channel
0 = All inputs, 1 = IN1 to 8 = IN8
updown_1-8: Setting relative value
-60 to 60
The specified value is added to the current audio input level. If the total value
exceeds the limit value (-60 to +0), the limit value will be applied.
@SIL,1,-1
@SIL,1,-1
-
Limit status of audio input level
@GIL
@GIL, in_1, in_2, in_3, in_4, in_5, in_6, in_7, in_8
in_1-8: Limit status
-1 = minimum settable value (-60 dB), 0 = not limit status,
1 = maximum settable value (±0 dB)
@GIL
@GIL,1,0,0,0,0,0,0,0
IN1: maximum settable value
Other input channels: not limit value
-
Output lip sync
@GLO
@GLO, frame_1, frame_2
@SLO, ch_1, frame_1 (, ch_2, frame_2)
@SLO, ch_1, frame_1 (, ch_2, frame_2)
frame_1-2: Output lip sync
0 to 8 [Default] 0
ch_1-2: Output channel
0 = All outputs, 1 = OUT1, 2 = OUT2
@GLO
@GLO,0,2
OUT1: 0 frame, OUT2: 2 frames
@SLO,1,2
@SLO,1,2
-