Table of Contents
Advertisement
@GHE / @SHE
Getting
Command
Response
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description Getting HDCP input enabled/disabled.
Setting
Command
example
Response
Description Setting IN1 HDCP input to be disabled.
Remarks
@GAI / @SAI
Getting
Command
Response
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description Getting signal type of analog input.
Setting
Command
example
Response
Description Setting the signal type of IN6 and IN7 to YPbPr.
Remarks
MSD-701UHD / 702UHD / 801UHD/ 802UHD Command Guide
HDCP input enabled/disabled
@GHE
@GHE, hdcp_1, hdcp_2, hdcp_3, hdcp_4, hdcp_5, hdcp_6, hdcp_7, hdcp_8
@SHE, ch_1, hdcp_1 (, ch_2, hdcp_2)
@SHE, ch_1, hdcp_1 (, ch_2, hdcp_2)
hdcp_1-8: HDCP input enabled/disabled
0 = DISABLE, 1 = HDCP 1.4, 2 = HDCP 2.2
[Default] HDCP 2.2 [IN1,IN2,IN8], HDCP 1.4 [IN3 to IN7]
ch_1-8: Input channel
0 = All digital inputs, 1 = IN1 to 8 = IN8
@GHE
@GHE,1,1,0,1,1,1,1,1
IN3: disables HDCP input, other input channels: enables HDCP 1.4 input
@SHE,1,0
@SHE,1,0
These commands are only for digital input.
IN6 and IN7 are available only if "1" (Digital signal) is selected for "@GIN / @SIN
Signal selection of DVI input connector". If "0" (Analog signal) is selected, "-1"
is returned.
Analog input type
@GAI
@GAI, type_1, type_2
@SAI, ch_1, type_1 (, ch_2, type_2)
@SAI, ch_1, type_1 (, ch_2, type_2)
type_1-2: Signal type
0 = AUTO [Default],
3 = VIDEO AUTO,
ch_1-2: Input channel
0 = All analog inputs, 6 = IN6, 7 = IN7
@GAI
@GAI,0,2
IN6: AUTO, IN7: YPbPr
@SAI,0,2
@SAI,0,2
These commands are only for analog input.
IN6 and IN7 are available only if "0" (Analog signal) is selected for "@GIN / @SIN
Signal selection of DVI input connector". If "1" (Digital signal) is selected, "-1" is
returned.
1 = RGB,
2 = YPbPr,
4 = VIDEO,
5 = Y/C
37
Advertisement
Table of Contents
