Table of Contents
Advertisement
Section 5: Parts and Module Replacement
5.4.3 High Security Lid
Remove the high security lid to access components in the
light engine and cardcage compartments. NOTICE! Only
Christie authorized service technicians should open
the high security lid.
(Estimated Replacement Time: 2 minutes)
1. Remove front top lid. Refer to
2. Using the high security key, unlock the high security lid.
(Figure 5-3)
3. Lift the lid up and remove.
5.4.4 Rear Right Skin (ignitor/blower compartment)
The rear right skin is held in pace by three captive
screws. Removing this skin provides access to the
igniter, lamp blower, lamp blower interlock,
LVPS and AC relay.
(Estimated Replacement Time: 2 minutes)
1. Using a #2 Phillips
screws. (Figure 5-4)
2. Lift the skin up and out to remove.
5-6
5.4.2 Front Top
, loosen the three captive
™
Lid.
Figure 5-3 High Security Lid
Figure 5-4 Rear Right Skin
D4K35 Service Manual
020-100817-01 Rev. 1 (04-2012)
Advertisement
Table of Contents
