Table of Contents
Advertisement
Chapter 24
| Multicast Filtering Commands
MVR for IPv4
mvr domain
Default Setting
Disabled
Command Mode
Global Configuration
Example
The following an MVR group address profile to domain 1:
Console(config)#mvr domain 1 associated-profile rd
Console(config)#
Related Commands
mvr profile (701)
This command enables Multicast VLAN Registration (MVR) for a specific domain.
Use the no form of this command to disable MVR for a domain.
Syntax
[no] mvr domain domain-id
domain-id - An independent multicast domain. (Range: 1-5)
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
Only IGMP version 2 or 3 hosts can issue multicast join or leave messages. If MVR
must be configured for an IGMP version 1 host, the multicast groups must be
statically assigned using the
Example
The following example enables MVR for domain 1:
Console(config)#mvr domain 1
Console(config)#
mvr vlan group
command.
– 700 –
Hide quick links:
Advertisement
Table of Contents
