Mvr6 Domain - Edge-Core ECS4120-28F Reference Manual

Table 147: Multicast VLAN Registration for IPv6 Commands
Command
show mvr6 members
show mvr6 profile
show mvr6 statistics
mvr6 associated-
This command binds the MVR6 group addresses specified in a profile to an MVR6
domain. Use the no form of this command to remove the binding.
profile
Syntax
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
MRV6 domains can be associated with more than one MVR6 profile. But since MVR6
domains cannot share the group range, an MRV6 profile can only be associated
with one MVR6 domain.
Example
The following an MVR6 group address profile to domain 1:
Console(config)#mvr6 domain 1 associated-profile rd
Console(config)#

mvr6 domain

This command enables Multicast VLAN Registration for IPv6 (MVR6) for a specific
domain. Use the no form of this command to disable MVR6 for a domain.
Syntax
Function
Shows information about the current number of entries in the
forwarding database, or detailed information about a specific
multicast address
Shows all configured MVR profiles
Shows MVR protocol statistics for the specified interface
[no] mvr6 domain domain-id associated-profile profile-name
domain-id - An independent multicast domain. (Range: 1-5)
profile-name - The name of a profile containing one or more MVR6 group
addresses. (Range: 1-21 characters)
[no] mvr6 domain domain-id
domain-id - An independent multicast domain. (Range: 1-5)
– 723 –
Chapter 24
| Multicast Filtering Commands
(Continued)
MVR for IPv6
Mode
PE
PE
PE