Table 136: MLD Snooping Commands
Command
clear ipv6 mld snooping
statistics
show ipv6 mld snooping
show ipv6 mld snooping
group
show ipv6 mld snooping
group source-list
show ipv6 mld snooping
mrouter
show ipv6 mld snooping
statistics
ipv6 mld snooping
This command enables MLD Snooping globally on the switch. Use the no form to
disable MLD Snooping.
Syntax
Default Setting
Disabled
Command Mode
Global Configuration
Example
The following example enables MLD Snooping:
ipv6 mld snooping
This command allows the switch to act as the querier for MLDv2 snooping. Use the
no form to disable this feature.
querier
Syntax
Default Setting
Disabled
Command Mode
Global Configuration
Function
Clears MLD snooping statistics
Displays MLD Snooping configuration
Displays the learned groups
Displays the learned groups and corresponding source list PE
Displays the information of multicast router ports
Shows IGMP snooping protocol statistics for the specified
interface
[no] ipv6 mld snooping
Console(config)#ipv6 mld snooping
Console(config)#
[no] ipv6 mld snooping querier
– 677 –
Chapter 24
| Multicast Filtering Commands
(Continued)
MLD Snooping
Mode
PE
PE
PE
PE
PE