Ip Igmp Snooping - Edge-Core ECS4120-28F Reference Manual

Table 129: IGMP Snooping Commands
Command
show ip igmp snooping
show ip igmp snooping
group
show ip igmp snooping
mrouter
show ip igmp snooping
statistics

ip igmp snooping

This command enables IGMP snooping globally on the switch or on a selected
VLAN interface. Use the no form to disable it.
Syntax
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
◆
◆
Example
The following example enables IGMP snooping globally.
Function
Shows the IGMP snooping, proxy, and query configuration PE
Shows known multicast group, source, and host port
mapping
Shows multicast router ports
Shows IGMP snooping protocol statistics for the specified
interface
[no] ip igmp snooping [vlan vlan-id]
vlan-id - VLAN ID (Range: 1-4094)
When IGMP snooping is enabled globally, the per VLAN interface settings for
IGMP snooping take precedence.
When IGMP snooping is disabled globally, snooping can still be configured per
VLAN interface, but the interface settings will not take effect until snooping is
re-enabled globally.
Console(config)#ip igmp snooping
Console(config)#
– 641 –
Chapter 24
| Multicast Filtering Commands
(Continued)
IGMP Snooping
Mode
PE
PE
PE