Pppoe Intermediate-Agent Trust - Edge-Core ECS4120-28F Reference Manual

Chapter 8
| Authentication Commands
PPPoE Intermediate Agent
pppoe intermediate-
agent trust
pppoe intermediate-
agent vendor-tag strip
Command Usage
If the delimiter is enabled and it occurs in the remote ID string, the string will be
truncated at that point.
Example
This command enables the delimiter for port 5.
Console(config)#interface ethernet 1/5
Console(config-if)#pppoe intermediate-agent port-format-type remote-id
Console(config-if)#
This command sets an interface to trusted mode to indicate that it is connected to a
PPPoE server. Use the no form to set an interface to untrusted mode.
Syntax
[no] pppoe intermediate-agent trust
Default Setting
Untrusted
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
◆
Set any interfaces connecting the switch to a PPPoE Server as trusted.
Interfaces that connect the switch to users (PPPoE clients) should be set as
untrusted.
◆
At least one trusted interface must be configured on the switch for the PPPoE
IA to function.
Example
Console(config)#interface ethernet 1/5
Console(config-if)#pppoe intermediate-agent trust
Console(config-if)#
This command enables the stripping of vendor tags from PPPoE Discovery packets
sent from a PPPoE server. Use the no form to disable this feature.
Syntax
[no] pppoe intermediate-agent vendor-tag strip
Default Setting
Disabled
– 274 –